What does this code mean?
The car compares two position signals, A and B, to check that throttle control makes sense. P2135 means they do not agree as expected. Reduced power may follow, but the signals and connections need checking before blaming a part.
Read it with the other codes
A single low-input fault such as P0122 can help explain the disagreement, while P2135 on its own still requires both tracks and their circuits to be checked.
Possible causes to investigate
These are possibilities, not a diagnosis or a ranked list of failed parts.
- An unreliable position signal caused by a connector, wiring, reference supply or sensor.
- A disagreement between position tracks or a throttle assembly problem requiring vehicle-specific checks.
What to do first
- Record reduced-power messages and whether accelerator response changed. Note recent battery, pedal or throttle work.
- Do not force an electronic throttle plate or probe connectors with improvised tools. If acceleration is unpredictable, stop safely and arrange help.
What the workshop can check
Identify the affected sensor and compare position tracks, supply and grounds using the correct wiring and diagnostic procedure. The generic throttle/pedal label does not establish which assembly must be replaced.
A useful question to ask
Which track becomes inconsistent, and does the mismatch originate in the sensor, connection or supply?
Your vehicle changes the next step
Year, make, model, engine and the complete code list matter. Cylinder layout, test conditions and repair procedures can differ. Use service information for the exact vehicle; a generic code does not establish an exact failed part.
Can I keep driving?
This page cannot decide whether your car is safe to drive. A flashing engine light, severe shaking, overheating, strong fuel smell or major power loss calls for prompt attention. Stop safely when needed, follow your handbook and seek assistance rather than continuing a test drive.
Terms in this guide
These words appear in the explanation. Select an underlined term in the text to reach its definition.
- Sensor and signal
- A sensor measures something such as pressure or temperature. Its signal carries that information electrically to the car computer; a wrong reading does not always mean the measured component is faulty.
- Throttle plate and throttle body
- The throttle plate is a flap controlling air entering the engine. The throttle body contains it; it is separate from the accelerator pedal you press.
- Cylinder and piston
- A cylinder is the chamber where fuel burns. A piston moves inside it and receives the force from combustion. Cylinder numbering depends on the engine.
- Bank 1 and bank 2
- A bank is a group of cylinders. Bank 1 contains cylinder 1; bank 2 is the other group, if present. Left or right cannot be assigned without identifying the engine.
- Circuit, supply and ground
- A circuit includes the wiring and connections carrying electricity. Supply powers a component; ground is its electrical return. A fault in any of these can change a reading.
Sources and scope
Definitions and general OBD context are cross-checked against the references below. Manufacturer documents describe specific vehicles and systems; their procedures and thresholds are not instructions for every make. This is educational guidance, not a vehicle-specific repair procedure.